Which one of the following would you use to perform a disk-to-disk backup of a FAS6070
controlled by Legato NetWorker?
A - VTL
B - SnapVault
C - Open Systems SnapVault
D - NDMP
Answer: A
A customer is using OSSV2.x to backup their Windows 2003 server and wishes to ensure that all
open files get backed up correctly. What will you use to achieve this?
A - OFM
B - NDMP
C - VDS
D - VSS
Answer: D
Customer wants to do a nightly backup that is locked down for compliance purposes. Which
product will you use?
A - SnapLock
B - SnapMirror
C - SnapVault
D - LockVault
Answer: D
A customer has a volume with 5 qtrees and assorted directories and files not in the qtrees. How
can the customer backup that data not in the qtrees?
A - Use DFM to establish SnapVault relationships
B - Use SnapVault command line
C - Use NetBackup to establish SnapVault relationships
D - All of the above
Answer: B
Which three of the following is true about the Nearstore VTL (NSVTL)?
A - The NSVTL takes backup streams and sends them to the least-loaded RAID Group of disks.
B - The NSVTL shares disk blocks to improve performance.
C - The NSVTL can achieve maximum performance with less than the maximum disk
configuration installed.
D - The NSVTL will reallocate backup streams dynamically during backups if other RAID Groups
become less loaded.
Answer: A, C, D
How can you make a SnapVault destination volume read-write?
A - SnapVault break
B - SnapMirror/SnapVault bundle
C - Cannot do it
D - SnapVault destinations are already read-write
Answer: B
A customer has a requirement that the backup begins at 12:30am daily. How can they meet this
requirement using SnapVault?
A - Standard SnapVault schedules
B - It is not possible
C - Manual SnapVault update
D - FilerView
Answer: C
On which of the following platforms can DFM support backing up to tape?
A - FAS
B - NearStore
C - Both FAS and NearStore
D - None of the above
Answer: D
Assuming a tape drive speed of 50 MB/s. How many tape drives would it take to backup 2 TB in
under 5 hours?
A - 2
B - 3
C - 4
D - 5
Answer: B
Which three of the following tools can be used to manage OSSV?
A - Legato NetWorker.
B - BakBone NetVault.
C - CommVault QiNetix
D - Syncsort Backup Express
Answer: B, C, D
In which scenario will you set the OSSV BLI level to Off?
A - Slow netwok
B - Large files subject to small changes
C - Large files changing completely
D - Cannot turn it Off”
Answer: C
A customer wants to use SnapVault to backup snapshots from a traditional volume. Which one of
the following will impact SnapVault performance?
A - Application running on the host
B - Number of disks in the destination’s Root Volume
C - Volume type on the destination
D - Frequency of SnapVault transfers
Answer: D
If your customer complains about ‘slow tape backups’, how would you check what the absolute
maximum backup performance could possibly be?
A - SnapMirror the data to another volume
B - Ask them to backup to a faster tape
C - Dump the data to null device on the EAS unit
D - Ask them to backup a subset of their data
Answer: C
A customer has licensed their FAS3020 with a Nearstore option to serve as the target
(secondary) for multiple SnapVault backups. They notice they are not reaching the 32 maximum
concurrent stream limit. What could be the issue?
A - A FAS3020 with a Nearstore option has a maximum concurrent stream limit of 16
B - The customer needs to license the source systems with a Nearstore license
C - They are replicating rapidly changing data and may be maxing out the destination’s
performance before reaching the max number of concurrent streams
D - They do not have jumbo frames set on the destination FAS3020
Answer: C
Where is SnapVault snapshot scheduling controlled?
A - Primary
B - Secondary
C - Primary and Secondary
D - FilerView
Answer: C
Which one of the following are supported configurations for a VTL?
A - 1,2,3,4
B - 1,2,3,5
C - 2,3,4,5
D - 1,2,4,5
E - 1,2,3,4,5
Answer: B
Syncsort integration with OSSV supports:
A - MS SQL DB Recovery.
B - MS Exchange Mailbox Recovery.
C - Bare Metal Recovery.
D - All of the above.
Answer: D
Where is NetApp OSSV snapshot scheduling controlled?
A - Primary
B - Secondary
C - Primary and secondary
D - FilerView
Answer: B
Which one of the following would you use to perform a disk-to-disk backup of a FAS6070controlled by Legato NetWorker?A - VTLB - SnapVaultC - Open Systems SnapVaultD - NDMPAnswer: AA customer is using OSSV2.x to backup their Windows 2003 server and wishes to ensure that allopen files get backed up correctly. What will you use to achieve this?A - OFMB - NDMPC - VDSD - VSSAnswer: DCustomer wants to do a nightly backup that is locked down for compliance purposes. Whichproduct will you use?A - SnapLockB - SnapMirrorC - SnapVaultD - LockVaultAnswer: DA customer has a volume with 5 qtrees and assorted directories and files not in the qtrees. Howcan the customer backup that data not in the qtrees?A - Use DFM to establish SnapVault relationshipsB - Use SnapVault command lineC - Use NetBackup to establish SnapVault relationshipsD - All of the aboveAnswer: BWhich three of the following is true about the Nearstore VTL (NSVTL)?A - The NSVTL takes backup streams and sends them to the least-loaded RAID Group of disks.B - The NSVTL shares disk blocks to improve performance.C - The NSVTL can achieve maximum performance with less than the maximum diskconfiguration installed.D - The NSVTL will reallocate backup streams dynamically during backups if other RAID Groupsbecome less loaded.Answer: A, C, DHow can you make a SnapVault destination volume read-write?A - SnapVault breakB - SnapMirror/SnapVault bundleC - Cannot do itD - SnapVault destinations are already read-writeAnswer: BA customer has a requirement that the backup begins at 12:30am daily. How can they meet thisrequirement using SnapVault?A - Standard SnapVault schedulesB - It is not possibleC - Manual SnapVault updateD - FilerViewAnswer: COn which of the following platforms can DFM support backing up to tape?A - FASB - NearStoreC - Both FAS and NearStoreD - None of the aboveAnswer: DAssuming a tape drive speed of 50 MB/s. How many tape drives would it take to backup 2 TB inunder 5 hours?A - 2B - 3C - 4D - 5Answer: BWhich three of the following tools can be used to manage OSSV?A - Legato NetWorker.B - BakBone NetVault.C - CommVault QiNetixD - Syncsort Backup ExpressAnswer: B, C, DIn which scenario will you set the OSSV BLI level to Off?A - Slow netwokB - Large files subject to small changesC - Large files changing completelyD - Cannot turn it Off”Answer: CA customer wants to use SnapVault to backup snapshots from a traditional volume. Which one ofthe following will impact SnapVault performance?A - Application running on the hostB - Number of disks in the destination’s Root VolumeC - Volume type on the destinationD - Frequency of SnapVault transfersAnswer: DIf your customer complains about ‘slow tape backups’, how would you check what the absolutemaximum backup performance could possibly be?A - SnapMirror the data to another volumeB - Ask them to backup to a faster tapeC - Dump the data to null device on the EAS unitD - Ask them to backup a subset of their dataAnswer: CA customer has licensed their FAS3020 with a Nearstore option to serve as the target(secondary) for multiple SnapVault backups. They notice they are not reaching the 32 maximumconcurrent stream limit. What could be the issue?A - A FAS3020 with a Nearstore option has a maximum concurrent stream limit of 16B - The customer needs to license the source systems with a Nearstore licenseC - They are replicating rapidly changing data and may be maxing out the destination’sperformance before reaching the max number of concurrent streamsD - They do not have jumbo frames set on the destination FAS3020Answer: CWhere is SnapVault snapshot scheduling controlled?A - PrimaryB - SecondaryC - Primary and SecondaryD - FilerViewAnswer: CWhich one of the following are supported configurations for a VTL?A - 1,2,3,4B - 1,2,3,5C - 2,3,4,5D - 1,2,4,5E - 1,2,3,4,5Answer: BSyncsort integration with OSSV supports:A - MS SQL DB Recovery.B - MS Exchange Mailbox Recovery.C - Bare Metal Recovery.D - All of the above.Answer: DWhere is NetApp OSSV snapshot scheduling controlled?A - PrimaryB - SecondaryC - Primary and secondaryD - FilerViewAnswer: B
You have been asked to size a VTL600 to hold the disk to disk backups of a FAS3020 with the
following characteristics:
Currently has 40TB of data.
Data is expanding at about 25% per year.
The data change rate is about 5% of files per day.
How much raw disk will be needed to cope with the requirement in 1 year’s time if 1 full backup
and 4 incremental daily backups are to be kept on the VTL600?
A - 60TB
B - 70TB
C - 84TB
D - 100TB
Answer: C
When performing a tape backup on a Network Appliance storage system, administrators can
backup volumes at three levels. These three levels are:
A - Full storage system, full volume, full qtree
B - Full volume, full qtree, full directory
C - Full volume, full qtree, file
D - Full Aggregate, full volume, full qtree
Answer: B
Customer has a MS Exchange environment. They want to implement disk-to disk backup for
remote offices with Exchange integration with their backup product. Which backup solution will
best meet this requirement?
A - SyncSort Backup Express - OSSV
B - NetAppOSSV
C - VFM
D - VTL
Answer: A
__________ can be used to protect the SnapVault secondary volumes.
A - Qtree SnapMirror
B - SnapVault
C - Volume SnapMirror
D - Synchronous SnapMirror
Answer: C
Of the following, which one is the best zoning configuration for tape drives and hosts connecting
to LUNs on the NetApp ?
A - All in one zone
B - Load balanced equal number of devices in each zone
C - Divide tape and LUN traffic into separate zones
D - Hard zone everything
Answer: C
A customer has backed up a SnapVault volume on a SnapVault secondary to tape. To recover
the data from tape, the customer can ship the tapes to the primary site and restore directly to the
primary’ volume.
A - True
B - False
Answer: A
OSSV has been installed on a brand new server that has over 2TB of data at a remote office. The
expected change rate is only 2% so OSSV is a good fit, however; the customer only has a WAN
connection back to the datacenter, which would create a lengthy baseline transfer. What is
another alternative to seeding the secondary for the baseline?
A - NDMP
B - RoboCopy
C - SnapMirror to Tape
D - LREP
Answer: D
Your customer has decided to use a single VTL600 for their backups, based on the following
requirements:
The data to be backed up is:
Exchange data - 3TB
Exchange data - 2TB
SQL database 1 - 1TB
SQL database 2 - 2TB
SQL database 3 - 1 TB
User home directories - 2.5TB
Oracle database - 2TB
Development data- 1.5TH
Archive data - 3TB
Miscellaneous servers - 2TB
All of this data is held on high speed storage, and will be backed up using NDMP.
All backups are to be full backups.
Backups will be taken each night, Monday to Friday. No backups will be taken Saturday or
Sunday.
All backups to complete in less than 12 hours.
After the Friday backup finishes, the data will be copied to physical tape.
Only the last 3 backups will ever be kept online.
The RTO for the Exchange servers is 12 hours.
Which one of these statements is correct
A - The single VTL600 configuration is suitable
B - This requirement will require 2 VTL600 units
C - This requirement will require 3 VTL600 units
D - This requirement can not be met with the VTL600
Answer: A
You have been asked to size a VTL600 to hold the disk to disk backups of a FAS3020 with thefollowing characteristics:Currently has 40TB of data.Data is expanding at about 25% per year.The data change rate is about 5% of files per day.How much raw disk will be needed to cope with the requirement in 1 year’s time if 1 full backupand 4 incremental daily backups are to be kept on the VTL600?A - 60TBB - 70TBC - 84TBD - 100TBAnswer: CWhen performing a tape backup on a Network Appliance storage system, administrators canbackup volumes at three levels. These three levels are:A - Full storage system, full volume, full qtreeB - Full volume, full qtree, full directoryC - Full volume, full qtree, fileD - Full Aggregate, full volume, full qtreeAnswer: BCustomer has a MS Exchange environment. They want to implement disk-to disk backup forremote offices with Exchange integration with their backup product. Which backup solution willbest meet this requirement?A - SyncSort Backup Express - OSSVB - NetAppOSSVC - VFMD - VTLAnswer: A__________ can be used to protect the SnapVault secondary volumes.A - Qtree SnapMirrorB - SnapVaultC - Volume SnapMirrorD - Synchronous SnapMirrorAnswer: COf the following, which one is the best zoning configuration for tape drives and hosts connectingto LUNs on the NetApp ?A - All in one zoneB - Load balanced equal number of devices in each zoneC - Divide tape and LUN traffic into separate zonesD - Hard zone everythingAnswer: CA customer has backed up a SnapVault volume on a SnapVault secondary to tape. To recoverthe data from tape, the customer can ship the tapes to the primary site and restore directly to theprimary’ volume.A - TrueB - FalseAnswer: AOSSV has been installed on a brand new server that has over 2TB of data at a remote office. Theexpected change rate is only 2% so OSSV is a good fit, however; the customer only has a WANconnection back to the datacenter, which would create a lengthy baseline transfer. What isanother alternative to seeding the secondary for the baseline?A - NDMPB - RoboCopyC - SnapMirror to TapeD - LREPAnswer: DYour customer has decided to use a single VTL600 for their backups, based on the followingrequirements:The data to be backed up is:Exchange data - 3TBExchange data - 2TBSQL database 1 - 1TBSQL database 2 - 2TBSQL database 3 - 1 TBUser home directories - 2.5TBOracle database - 2TBDevelopment data- 1.5THArchive data - 3TBMiscellaneous servers - 2TBAll of this data is held on high speed storage, and will be backed up using NDMP.All backups are to be full backups.Backups will be taken each night, Monday to Friday. No backups will be taken Saturday orSunday.All backups to complete in less than 12 hours.After the Friday backup finishes, the data will be copied to physical tape.Only the last 3 backups will ever be kept online.The RTO for the Exchange servers is 12 hours.Which one of these statements is correctA - The single VTL600 configuration is suitableB - This requirement will require 2 VTL600 unitsC - This requirement will require 3 VTL600 unitsD - This requirement can not be met with the VTL600Answer: A
At what level is the SnapVault snapshot schedule maintained?
A - File
B - Qtree
C - Volume
D - Filer
Answer: C
The NetBackup software can be used to control and track when data is written from NearStore
VTL to the Tape device.
A - True
B - False
Answer: A
Which one of the following replication schedules can be achieved using SnapVault?
A - SnapVault can be taken every minute to guard against data loss
B - SnapVault can be used to replicate data synchronously between two storage devices,
ensuring zero loss of data
C - SnapVault can be replicated as often as hourly, giving protection better than most tape
environments
D - SnapVault can be performed semi-synchronously’, to ensure updates are only a few
operations or seconds behind
Answer: C
A customer is interested in lowering the recovery point objective (RPO) of the current NetBackup
NDMP and tape based backup strategy they are using to protect file data on the Network
Appliance device. The current RPO is 24 hours. They would like to lower this to 4 hours. Which
product is the best choice to help enable this level of service?
A - NearstoreVTL
B - SnapVault for NetBackup
C - NetBackup SnapVault Management
D - SyncMirror
Answer: C
Single mailbox restore for Exchange works best with ________ and ________ .
A - SnapDrive and SnapManager for Exchange
B - SnapDrive and SnapVault
C - SnapManager for Exchange and SnapVault
D - SnapDrive and NetApp OSSV
Answer: A
What is the maximum number of SnapVault backups you can retain per volume on a SnapVault
destination?
A - 128
B - 32
C - 251
D - 255
Answer: C
Which one of the following is valid destination in a SnapVault for NetBackup solution?
A - R200 with traditional volumes
B - FAS 3050 with flexible volumes
C - FAS 3050 with the NearStore option and flexible volumes
D - FAS 3050 with NearStore license and traditional volumes
Answer: C
Customer wants to run 40 OSSV relationships concurrently. Which system can support this as a
destination with the Nearstore personality?
A - FAS3020
B - FAS3050
C - FAS980
D - FAS270
Answer: B
A customer has multiple OSSV primaries. Which two of the following factors will you take into
consideration to help you group those primary systems in destination volumes?
A - Network bandwidth
B - Data set size
C - Change rate
D - Client OS
Answer: A, C
A customer with OSSV has used the SnapVault/snapMirror bundle to convert their OSSV
destination to R/W for testing. The testing was a success and they would like to copy their
changes back to the OSSV primary. How can this be done?
A - OSSV resync
B - FTP
C - SnapMirror resync
D - None of the above
Answer: D
A customer has a volume on a filer that contains 10 qtrees. All but one of the qtrees have similar
change rates and size. The volume is scheduled to transfer every morning at 1 AM. The 9 qtrees
with similar characteristics all transfer within 15 minutes and the tenth qtree takes two hours to
complete. When will the SnapVault transfer be completed for those qtrees?
A - 01:15 hours
B - 02:05 hours
C - 03:05 hours
D - 04:15 hours
Answer: C
To restore data that was backed up to a NearStore VTL and then off to tape, you will need to
restore from tape to the NearStore VTL before restoring the data to the server.
A - True
B - False
Answer: B
What is the largest unit that you can backup with SnapVault?
A - Aggregate
B - Volume
C - Qtree
D - File
Answer: B
Which two statements are true about OSSV?
A - OSSV allows incremental backup to tape.
B - OSSV enables you to keep snapshots on your Windows and UNIX primary systems.
C - Whilst each OSSV transfer is incremental, each view on the secondary (snapshot) is seen as
a full backup.
D - You can manage OSSV with CLI (command line interface) tools, or through DataFabric
Manager, or via third party tools such as Syncsort/Bakbone/CommVault.
Answer: C, D
At what level is the SnapVault snapshot schedule maintained?A - FileB - QtreeC - VolumeD - FilerAnswer: CThe NetBackup software can be used to control and track when data is written from NearStoreVTL to the Tape device.A - TrueB - FalseAnswer: AWhich one of the following replication schedules can be achieved using SnapVault?A - SnapVault can be taken every minute to guard against data lossB - SnapVault can be used to replicate data synchronously between two storage devices,ensuring zero loss of dataC - SnapVault can be replicated as often as hourly, giving protection better than most tapeenvironmentsD - SnapVault can be performed semi-synchronously’, to ensure updates are only a fewoperations or seconds behindAnswer: CA customer is interested in lowering the recovery point objective (RPO) of the current NetBackupNDMP and tape based backup strategy they are using to protect file data on the NetworkAppliance device. The current RPO is 24 hours. They would like to lower this to 4 hours. Whichproduct is the best choice to help enable this level of service?A - NearstoreVTLB - SnapVault for NetBackupC - NetBackup SnapVault ManagementD - SyncMirrorAnswer: CSingle mailbox restore for Exchange works best with ________ and ________ .A - SnapDrive and SnapManager for ExchangeB - SnapDrive and SnapVaultC - SnapManager for Exchange and SnapVaultD - SnapDrive and NetApp OSSVAnswer: AWhat is the maximum number of SnapVault backups you can retain per volume on a SnapVaultdestination?A - 128B - 32C - 251D - 255Answer: CWhich one of the following is valid destination in a SnapVault for NetBackup solution?A - R200 with traditional volumesB - FAS 3050 with flexible volumesC - FAS 3050 with the NearStore option and flexible volumesD - FAS 3050 with NearStore license and traditional volumesAnswer: CCustomer wants to run 40 OSSV relationships concurrently. Which system can support this as adestination with the Nearstore personality?A - FAS3020B - FAS3050C - FAS980D - FAS270Answer: BA customer has multiple OSSV primaries. Which two of the following factors will you take intoconsideration to help you group those primary systems in destination volumes?A - Network bandwidthB - Data set sizeC - Change rateD - Client OSAnswer: A, CA customer with OSSV has used the SnapVault/snapMirror bundle to convert their OSSVdestination to R/W for testing. The testing was a success and they would like to copy theirchanges back to the OSSV primary. How can this be done?A - OSSV resyncB - FTPC - SnapMirror resyncD - None of the aboveAnswer: DA customer has a volume on a filer that contains 10 qtrees. All but one of the qtrees have similarchange rates and size. The volume is scheduled to transfer every morning at 1 AM. The 9 qtreeswith similar characteristics all transfer within 15 minutes and the tenth qtree takes two hours tocomplete. When will the SnapVault transfer be completed for those qtrees?A - 01:15 hoursB - 02:05 hoursC - 03:05 hoursD - 04:15 hoursAnswer: CTo restore data that was backed up to a NearStore VTL and then off to tape, you will need torestore from tape to the NearStore VTL before restoring the data to the server.A - TrueB - FalseAnswer: BWhat is the largest unit that you can backup with SnapVault?A - AggregateB - VolumeC - QtreeD - FileAnswer: BWhich two statements are true about OSSV?A - OSSV allows incremental backup to tape.B - OSSV enables you to keep snapshots on your Windows and UNIX primary systems.C - Whilst each OSSV transfer is incremental, each view on the secondary (snapshot) is seen asa full backup.D - You can manage OSSV with CLI (command line interface) tools, or through DataFabricManager, or via third party tools such as Syncsort/Bakbone/CommVault.Answer: C, D
Which one of the following can you manage with the command line but not with the DFM?
A - SnapVault at the volume level
B - SnapVault at the qtree level
C - SnapVault at the file level
D - SnapVault at the directory level
Answer: A
Customer wants to open a port to allow SnapVault replication. What port should they open up?
A - 10566
B - 10567
C - 10000
D - 10568
Answer: A
Which statement is correct?
A - Nearstore VTL can do block level incremental replication
B - Nearstore VTL does not compress data on disk.
C - Nearstore VTL enables incremental forever backup
D - Nearstore VTL dynamically balances incoming write workloads across back-end disk drives
Answer: D
SnapManager for Oracle is integrated with _________to perform Oracle backups.
A - SQL Plus
B - NDMP
C - MAN
D - NetAppOSSV
Answer: C
You have been asked to size an R200 to hold the disk to disk backups of a FA3270, a FAS270C
and a FAS3020 with the following characteristics:
The current capacities are:
FAS270 4TB.
FAS270C 6TB.
FAS3020 10TB.
Data is expanding at about 25% per year.
The data change rate is about 5% of blocks per day.
How much disk space will be needed to cope with the requirement in 1 year’s time it 30 days
backups are to be kept on the R200?
A - 26.25TB
B - 62.5TB
C - 64TB
D - 66.5TB
Answer: B
Which one of the following would you use to perform a disk-to-disk backup of an FAS6070 to an
R200?
A - VTL
B - SnapVault
C - Open Systems Snapvault
D - NDMP
Answer: B
Which one of following diagrams shows a supported backup topology for a NetApp?
A - A
B - S
C - C
D - D
E - E
Answer: E
A customer has backed up a NetApp volume to tape using DataONTAP dump. Which two of the
following options are available to restore the data?
A - DataONTAP restore
B - Solaris ufsrestore
C - HP-UX tar -xvf /dev/rmt/0m
D - Windows ntrestore
Answer: A, B
Which one of the following replication schedules can be achieved using SnapVault?
A - SnapVault can be taken every minute to guard against data loss
B - SnapVault can be used to replicate data synchronously between two storage devices,
ensuring zero loss of data
C - SnapVault can be replicated as often as hourly, giving protection better than most tape
environments
D - SnapVault can be performed ‘semi-synchronously’, to ensure updates are only a few
operations or seconds behind
Answer: C
At what level is the SnapVault snapshot schedule maintained?
A - File
B - Qtree
C - Volume
D - Filer
Answer: C
What is the maximum number of simultaneous SV/OSSV streams allowed to/from the FAS270?
A - 4
B - 8
C - 16
D - 128
Answer: B
Which two of the following OSSV management tools can be used to protect MS Exchange data
running on a Windows server with local disk?
A - Legato NetWorker.
B - BakBone NetVault.
C - CommVault QiNetix.
D - Syncsort Backup Express.
Answer: C, D
The tape Backup Scheme is 1 Full on Sunday, and a daily incremental for the rest of the week,
each on separate tapes. On Thursday the volume corrupts and you need to restore it. How many
tapes do you need for the restore?
A - 1
B - 4
C - 5
D - 6
Answer: B
Which one of the following can you manage with the command line but not with the DFM?A - SnapVault at the volume levelB - SnapVault at the qtree levelC - SnapVault at the file levelD - SnapVault at the directory levelAnswer: ACustomer wants to open a port to allow SnapVault replication. What port should they open up?A - 10566B - 10567C - 10000D - 10568Answer: AWhich statement is correct?A - Nearstore VTL can do block level incremental replicationB - Nearstore VTL does not compress data on disk.C - Nearstore VTL enables incremental forever backupD - Nearstore VTL dynamically balances incoming write workloads across back-end disk drivesAnswer: DSnapManager for Oracle is integrated with _________to perform Oracle backups.A - SQL PlusB - NDMPC - MAND - NetAppOSSVAnswer: CYou have been asked to size an R200 to hold the disk to disk backups of a FA3270, a FAS270Cand a FAS3020 with the following characteristics:The current capacities are:FAS270 4TB.FAS270C 6TB.FAS3020 10TB.Data is expanding at about 25% per year.The data change rate is about 5% of blocks per day.How much disk space will be needed to cope with the requirement in 1 year’s time it 30 daysbackups are to be kept on the R200?A - 26.25TBB - 62.5TBC - 64TBD - 66.5TBAnswer: BWhich one of the following would you use to perform a disk-to-disk backup of an FAS6070 to anR200?A - VTLB - SnapVaultC - Open Systems SnapvaultD - NDMPAnswer: BWhich one of following diagrams shows a supported backup topology for a NetApp?A - AB - SC - CD - DE - EAnswer: EA customer has backed up a NetApp volume to tape using DataONTAP dump. Which two of thefollowing options are available to restore the data?A - DataONTAP restoreB - Solaris ufsrestoreC - HP-UX tar -xvf /dev/rmt/0mD - Windows ntrestoreAnswer: A, BWhich one of the following replication schedules can be achieved using SnapVault?A - SnapVault can be taken every minute to guard against data lossB - SnapVault can be used to replicate data synchronously between two storage devices,ensuring zero loss of dataC - SnapVault can be replicated as often as hourly, giving protection better than most tapeenvironmentsD - SnapVault can be performed ‘semi-synchronously’, to ensure updates are only a fewoperations or seconds behindAnswer: CAt what level is the SnapVault snapshot schedule maintained?A - FileB - QtreeC - VolumeD - FilerAnswer: CWhat is the maximum number of simultaneous SV/OSSV streams allowed to/from the FAS270?A - 4B - 8C - 16D - 128Answer: BWhich two of the following OSSV management tools can be used to protect MS Exchange datarunning on a Windows server with local disk?A - Legato NetWorker.B - BakBone NetVault.C - CommVault QiNetix.D - Syncsort Backup Express.Answer: C, DThe tape Backup Scheme is 1 Full on Sunday, and a daily incremental for the rest of the week,each on separate tapes. On Thursday the volume corrupts and you need to restore it. How manytapes do you need for the restore?A - 1B - 4C - 5D - 6Answer: B
No comments:
Post a Comment
Leave Your Valuable Opinion