http://www.aroopam.com/
Which of the following volume options will disable automatic snapshot creation?A. Setting the nosnapdir option to onB. Setting the nosnap volume option to onC. Turning off access to the .snapshot directoryD. Setting snap reserve to 0%Answer: BThe entries in the /etc/exports file restricts access to volume data directly from Host2 being that it isread-only?A. /vol/data ro=Host2B. /vol/data ead=Host2C. /vol/data eadonly=Host2D. /vol/data oaccess=Host2Answer: AWhich two of the following options does NVRAM provide if Data ONTAP utilizes NVRAM part andparcel of its core system architecture?A. It is flushed by ONTAP every one second or when the NVRAM is 99% fullB. It provides a cache area for read transactionsC. It provides a cache area for write transactionsD. It is flushed by ONTAP every ten seconds or when the NVRAM is 50% fullAnswer: C,DAny LUNs can be made by making use of the FilerView.A. TrueB. FalseAnswer: AWhich of the following commands displays a total summary of information regarding the storage applianceand connected users?A. cifs connectionsB. cifs usersC. cifs sessionsD. cifs clientsAnswer: CA clustered failover on a NetApp system consists of a pair which of the following appliances?A. NearStore appliances connected and configuredB. NetCache appliances connected and configuredC. FAS appliances connected and configuredD. None of the aboveAnswer: CWhich of the following lines BEST describes a 50M tree quota for a qtree which goes by the name of"mydata" on volume "vol1"?Target Type Disk Files Thold Sdisk SfilesA. steve tree@/vol/vol1 50M - -B. /vol/vol1 steve@tree 50M - -C. /vol/vol1 qtree/steve 50M - -D. /vol/vol1/mydata tree 50M - -Answer: DWhich of the following would be best suited to complete the following sentence. The statitcommand________.A. includes NFS/CIFS statistics in the report.B. begins taking statistics and continues until the statit -e command is issued.C. ends the collection of statistics and displays the results.D. is used to obtain consistent statistical results over an interval.Answer: DWhat would the best reason be for using the aggr copy command?A. To change a traditional volume into a readonly volumeB. Due to NDMPcopy is disabled in Data OnTAP 7.0C. To migrate data from one storage appliance to anotherD. Duplicating raid settings between aggregatesAnswer: CWhich of the following is the most cost effective use of a NearStore?A. It is used in place of a storage appliance.B. It is used in place of a server.C. It is used for high performance database storage.D. It is used for nearline storage.Answer: DWhere does SyncMirror mirror data to? Choose one the following options.A. another volume on the same systemB. a second qtree on the same volumeC. another storage appliance active volumeD. a remote siteAnswer: AOne of the following is does not fit as an advantage of the multitrunk VIF which is it?A. higher throughputB. fault toleranceC. protection against a switch failureD. protection against a switch port failureAnswer: CWhich three of the following statements are true regarding flexible volumes?A. They are loosely coupled to its containing aggregate.B. Only one flexible volume can exist in an aggregate.C. They can be increased or decreased in increments of 4KB.D. Small flexible volumes of 20MB can be created.Answer: A,C,DWhich of the following commands from the special boot menu will zero disks and install a new filesystem?A. (5) Maintenance mode boot.B. (4) Initialize all disks.C. (2) Boot without /etc/rc.D. (1)Normal boot.E. (3) Change password.Answer: B
Which of the following volume options will disable automatic snapshot creation?
A. Setting the nosnapdir option to on
B. Setting the nosnap volume option to on
C. Turning off access to the .snapshot directory
D. Setting snap reserve to 0%
Answer: B
The entries in the /etc/exports file restricts access to volume data directly from Host2 being that it is
read-only?
A. /vol/data ro=Host2
B. /vol/data ead=Host2
C. /vol/data eadonly=Host2
D. /vol/data oaccess=Host2
Answer: A
Which two of the following options does NVRAM provide if Data ONTAP utilizes NVRAM part and
parcel of its core system architecture?
A. It is flushed by ONTAP every one second or when the NVRAM is 99% full
B. It provides a cache area for read transactions
C. It provides a cache area for write transactions
D. It is flushed by ONTAP every ten seconds or when the NVRAM is 50% full
Answer: C,D
Any LUNs can be made by making use of the FilerView.
A. True
B. False
Answer: A
Which of the following commands displays a total summary of information regarding the storage appliance
and connected users?
A. cifs connections
B. cifs users
C. cifs sessions
D. cifs clients
Answer: C
A clustered failover on a NetApp system consists of a pair which of the following appliances?
A. NearStore appliances connected and configured
B. NetCache appliances connected and configured
C. FAS appliances connected and configured
D. None of the above
Answer: C
Which of the following lines BEST describes a 50M tree quota for a qtree which goes by the name of
"mydata" on volume "vol1"?
Target Type Disk Files Thold Sdisk Sfiles
A. steve tree@/vol/vol1 50M - -
B. /vol/vol1 steve@tree 50M - -
C. /vol/vol1 qtree/steve 50M - -
D. /vol/vol1/mydata tree 50M - -
Answer: D
Which of the following would be best suited to complete the following sentence. The statit
command________.
A. includes NFS/CIFS statistics in the report.
B. begins taking statistics and continues until the statit -e command is issued.
C. ends the collection of statistics and displays the results.
D. is used to obtain consistent statistical results over an interval.
Answer: D
What would the best reason be for using the aggr copy command?
A. To change a traditional volume into a readonly volume
B. Due to NDMPcopy is disabled in Data OnTAP 7.0
C. To migrate data from one storage appliance to another
D. Duplicating raid settings between aggregates
Answer: C
Which of the following is the most cost effective use of a NearStore?
A. It is used in place of a storage appliance.
B. It is used in place of a server.
C. It is used for high performance database storage.
D. It is used for nearline storage.
Answer: D
Where does SyncMirror mirror data to? Choose one the following options.
A. another volume on the same system
B. a second qtree on the same volume
C. another storage appliance active volume
D. a remote site
Answer: A
One of the following is does not fit as an advantage of the multitrunk VIF which is it?
A. higher throughput
B. fault tolerance
C. protection against a switch failure
D. protection against a switch port failure
Answer: C
Which three of the following statements are true regarding flexible volumes?
A. They are loosely coupled to its containing aggregate.
B. Only one flexible volume can exist in an aggregate.
C. They can be increased or decreased in increments of 4KB.
D. Small flexible volumes of 20MB can be created.
Answer: A,C,D
Which of the following commands from the special boot menu will zero disks and install a new file
system?
A. (5) Maintenance mode boot.
B. (4) Initialize all disks.
C. (2) Boot without /etc/rc.
D. (1)Normal boot.
E. (3) Change password.
Answer: B
Which of the following volume options will disable automatic snapshot creation?A. Setting the nosnapdir option to onB. Setting the nosnap volume option to onC. Turning off access to the .snapshot directoryD. Setting snap reserve to 0%Answer: BThe entries in the /etc/exports file restricts access to volume data directly from Host2 being that it isread-only?A. /vol/data ro=Host2B. /vol/data ead=Host2C. /vol/data eadonly=Host2D. /vol/data oaccess=Host2Answer: AWhich two of the following options does NVRAM provide if Data ONTAP utilizes NVRAM part andparcel of its core system architecture?A. It is flushed by ONTAP every one second or when the NVRAM is 99% fullB. It provides a cache area for read transactionsC. It provides a cache area for write transactionsD. It is flushed by ONTAP every ten seconds or when the NVRAM is 50% fullAnswer: C,DAny LUNs can be made by making use of the FilerView.A. TrueB. FalseAnswer: AWhich of the following commands displays a total summary of information regarding the storage applianceand connected users?A. cifs connectionsB. cifs usersC. cifs sessionsD. cifs clientsAnswer: CA clustered failover on a NetApp system consists of a pair which of the following appliances?A. NearStore appliances connected and configuredB. NetCache appliances connected and configuredC. FAS appliances connected and configuredD. None of the aboveAnswer: CWhich of the following lines BEST describes a 50M tree quota for a qtree which goes by the name of"mydata" on volume "vol1"?Target Type Disk Files Thold Sdisk SfilesA. steve tree@/vol/vol1 50M - -B. /vol/vol1 steve@tree 50M - -C. /vol/vol1 qtree/steve 50M - -D. /vol/vol1/mydata tree 50M - -Answer: DWhich of the following would be best suited to complete the following sentence. The statitcommand________.A. includes NFS/CIFS statistics in the report.B. begins taking statistics and continues until the statit -e command is issued.C. ends the collection of statistics and displays the results.D. is used to obtain consistent statistical results over an interval.Answer: DWhat would the best reason be for using the aggr copy command?A. To change a traditional volume into a readonly volumeB. Due to NDMPcopy is disabled in Data OnTAP 7.0C. To migrate data from one storage appliance to anotherD. Duplicating raid settings between aggregatesAnswer: CWhich of the following is the most cost effective use of a NearStore?A. It is used in place of a storage appliance.B. It is used in place of a server.C. It is used for high performance database storage.D. It is used for nearline storage.Answer: DWhere does SyncMirror mirror data to? Choose one the following options.A. another volume on the same systemB. a second qtree on the same volumeC. another storage appliance active volumeD. a remote siteAnswer: AOne of the following is does not fit as an advantage of the multitrunk VIF which is it?A. higher throughputB. fault toleranceC. protection against a switch failureD. protection against a switch port failureAnswer: CWhich three of the following statements are true regarding flexible volumes?A. They are loosely coupled to its containing aggregate.B. Only one flexible volume can exist in an aggregate.C. They can be increased or decreased in increments of 4KB.D. Small flexible volumes of 20MB can be created.Answer: A,C,DWhich of the following commands from the special boot menu will zero disks and install a new filesystem?A. (5) Maintenance mode boot.B. (4) Initialize all disks.C. (2) Boot without /etc/rc.D. (1)Normal boot.E. (3) Change password.Answer: B
No comments:
Post a Comment
Leave Your Valuable Opinion