Cfmode is a(n) _____________-specific setting.
A - FCP
B - iSCSI
C - Active/Active
D - Active/Passive
Answer: A
If you are receiving RPC timeouts, the following troubleshooting steps would be appropriate:
1)Verify that the RPC is enabled.
2)Verify that the NFS daemons are running.
3)Verify that the correct mount points have been created.
A - True
B - False
Answer: A
Which command on the storage appliance allows you to collect statistics on the performance of
system resources such as CPU, NVRAM, network interfaces, and disks?
A - sysstat 1
B - netdiag-v
C - pktt
D - netstat-i
Answer: A
To configure a storage system as a member of an active directory, the time on the storage
system must be synchronized with the time on the Domain Controller.
A - True
B - False
Answer: A
Cloning a LUN from a snapshot will cause that snapshot to be______?
A - recreated.
B - corrupted.
C - locked.
D - destroyed.
Answer: C
Which command is the most appropriate for troubleshooting a multiprotocol authentication
problem?
A - wcc
B - rdfile /etc/rc
C - priv set advanced
D - sysstat 1
Answer: A
What feature guarantees that space is available for completing writes to a LUN?
A - fractional reserve
B - space reservation
C - overwrite reserve
D - snapshot reserve
Answer: B
Which command would you use to verify that the iSCSI service is running?
A - license add SCSI
B - iSCSI service
C - iSCSI status
D - iSCSI protocol
Answer: C
Which two will allow you to read and analyze a packet trace file generated by the storage
appliance? (Choose 2)
A - pktt
B - Netmon
C - Eternal View
D - Ethereal
Answer: B, D
The writeable snapshot that is created for a LUN clone depends on _______?
A - mirroring.
B - the snapshot taken at the time the clone was created.
C - exclusive access to the volume.
D - the data in the original LUN not changing.
Answer: B
To view per client NFS statistics on the storage appliance, options nfs.per_client_stats, enable
must be turned on.
A - True
B - False
Answer: A
To export volumes and directories automatically on reboot, include them in the /etc/exports file.
A - True
B - False
Answer: A
Three methods of creating a LUN are:
*Iun setup
*Iun map
*FiIeView
A - True
B - False
Answer: B
If a qtree security style is UNIX, CIFS client file access is determined by ________?
A - NTACLS
B - UNIX permissions, and if the CIFS user name can be mapped to a UNIX user name
C - the last client to set permissions.
D - (Not Allowed) A CIFS client cannot access files in a qtree with a security style of UNIX.
Answer: B
Which two commands can be performed with the SnapDrive for Windows graphical user
interface? (Choose 2.)
A - Create Disk
B - Create VLD
C - Connect Disk
D - Convert VLD to LUN
Answer: A, C
Given the content of the /etc/quotas file, fill in the blank. “The following user name(s) ________ is
given an explicit quota of 100 MB of disk space and 75K files in the /vol/wmv/proj1 qtree. This
user is also restricted to the default limit of 50 MB of diskspace and 15K files.”
A - wesson
B - All users
C - lmoe
D - None of the above
Answer: C
Which three can coexist on a NetApp storage appliance? (Choose 3.)
A - Domain Controller
B - NFS
C - CIFS
D - SAN
E - DFS
Answer: B, C, D
Which three statements apply to an entry in the /etc/exports file regarding exporting directories,
qtrees, and volumes? (Choose 3)
A - Export each volume separately.
B - The storage appliance must resolve host names.
C - Export ancestors and their descendants.
D - Export /vol.
Answer: A, B, C
Before running lun setup on the storage appliance, you must pre-create the igroup to which the
initiator will be attached.
A - True
B - False
Answer: B
NetApp recommends that Fibre Channel switches that have both disk and tape connected to
them should have separate zones created for each.
A - True
B - False
Answer: A
If you believe you have a FC SAN performance problem, which NetApp utility or command would
gather both your Solaris host and storage appliance data for analysis?
A - poststat
B - perestat
C - prestat
D - sio_ntap.exe
Answer: B
Which three commands would help you troubleshoot a LUN that cannot be accessed by a host?
(Choose 3.)
A - fcp wwpn
B - igroup show
C - lun map-v
D - fcp show initiator
E - lun show-err
Answer: B, C, D
Which one of the following will enable “symlink_strict_security”?
A - options cifs.symlink_strict_security on
B - cifs shares -change <sharename> -symlink_strict_security
C - options symlink_strict_security=true
D - options symlink_strict_security=on
Answer: B
As a best practice for long-term use, a writeable snapshot of a LUN should be turned into a LUN
clone.
A - True
B - False
Answer: A
On a newly created qtree, you notice the following:
* CIFS permissions on the qtree are everyone: full control.
* Your Windows users can access the share, and can copy, edit, and delete files without issue.
* The super user on a Solaris workstation can mount other qtrees from the same volume.
The super user receives an “Access Denied” message when he attempts to mount the new qtree.
What’s the most likely cause of this error?
A - NFS is turned off on the storage appliance.
B - The qtree has not been exported.
C - The qtree is set to ntfs only security style.
D - The qtree is missing from the /etc/hosts file.
Answer: B
Cfmode is a(n) _____________-specific setting.A - FCPB - iSCSIC - Active/ActiveD - Active/PassiveAnswer: AIf you are receiving RPC timeouts, the following troubleshooting steps would be appropriate:1)Verify that the RPC is enabled.2)Verify that the NFS daemons are running.3)Verify that the correct mount points have been created.A - TrueB - FalseAnswer: AWhich command on the storage appliance allows you to collect statistics on the performance ofsystem resources such as CPU, NVRAM, network interfaces, and disks?A - sysstat 1B - netdiag-vC - pkttD - netstat-iAnswer: ATo configure a storage system as a member of an active directory, the time on the storagesystem must be synchronized with the time on the Domain Controller.A - TrueB - FalseAnswer: ACloning a LUN from a snapshot will cause that snapshot to be______?A - recreated.B - corrupted.C - locked.D - destroyed.Answer: CWhich command is the most appropriate for troubleshooting a multiprotocol authenticationproblem?A - wccB - rdfile /etc/rcC - priv set advancedD - sysstat 1Answer: AWhat feature guarantees that space is available for completing writes to a LUN?A - fractional reserveB - space reservationC - overwrite reserveD - snapshot reserveAnswer: BWhich command would you use to verify that the iSCSI service is running?A - license add SCSIB - iSCSI serviceC - iSCSI statusD - iSCSI protocolAnswer: CWhich two will allow you to read and analyze a packet trace file generated by the storageappliance? (Choose 2)A - pkttB - NetmonC - Eternal ViewD - EtherealAnswer: B, DThe writeable snapshot that is created for a LUN clone depends on _______?A - mirroring.B - the snapshot taken at the time the clone was created.C - exclusive access to the volume.D - the data in the original LUN not changing.Answer: BTo view per client NFS statistics on the storage appliance, options nfs.per_client_stats, enable must be turned on.A - TrueB - FalseAnswer: ATo export volumes and directories automatically on reboot, include them in the /etc/exports file.A - TrueB - FalseAnswer: AThree methods of creating a LUN are:*Iun setup*Iun map*FiIeViewA - TrueB - FalseAnswer: BIf a qtree security style is UNIX, CIFS client file access is determined by ________?A - NTACLSB - UNIX permissions, and if the CIFS user name can be mapped to a UNIX user nameC - the last client to set permissions.D - (Not Allowed) A CIFS client cannot access files in a qtree with a security style of UNIX.Answer: BWhich two commands can be performed with the SnapDrive for Windows graphical userinterface? (Choose 2.)A - Create DiskB - Create VLDC - Connect DiskD - Convert VLD to LUNAnswer: A, CGiven the content of the /etc/quotas file, fill in the blank. “The following user name(s) ________ isgiven an explicit quota of 100 MB of disk space and 75K files in the /vol/wmv/proj1 qtree. Thisuser is also restricted to the default limit of 50 MB of diskspace and 15K files.”A - wessonB - All usersC - lmoeD - None of the aboveAnswer: CWhich three can coexist on a NetApp storage appliance? (Choose 3.)A - Domain ControllerB - NFSC - CIFSD - SANE - DFSAnswer: B, C, DWhich three statements apply to an entry in the /etc/exports file regarding exporting directories,qtrees, and volumes? (Choose 3)A - Export each volume separately.B - The storage appliance must resolve host names.C - Export ancestors and their descendants.D - Export /vol.Answer: A, B, CBefore running lun setup on the storage appliance, you must pre-create the igroup to which theinitiator will be attached.A - TrueB - FalseAnswer: BNetApp recommends that Fibre Channel switches that have both disk and tape connected tothem should have separate zones created for each.A - TrueB - FalseAnswer: AIf you believe you have a FC SAN performance problem, which NetApp utility or command wouldgather both your Solaris host and storage appliance data for analysis?A - poststatB - perestatC - prestatD - sio_ntap.exeAnswer: BWhich three commands would help you troubleshoot a LUN that cannot be accessed by a host?(Choose 3.)A - fcp wwpnB - igroup showC - lun map-vD - fcp show initiatorE - lun show-errAnswer: B, C, DWhich one of the following will enable “symlink_strict_security”?A - options cifs.symlink_strict_security onB - cifs shares -change <sharename> -symlink_strict_securityC - options symlink_strict_security=trueD - options symlink_strict_security=onAnswer: BAs a best practice for long-term use, a writeable snapshot of a LUN should be turned into a LUNclone.A - TrueB - FalseAnswer: AOn a newly created qtree, you notice the following: * CIFS permissions on the qtree are everyone: full control.* Your Windows users can access the share, and can copy, edit, and delete files without issue.* The super user on a Solaris workstation can mount other qtrees from the same volume.The super user receives an “Access Denied” message when he attempts to mount the new qtree.What’s the most likely cause of this error?A - NFS is turned off on the storage appliance.B - The qtree has not been exported.C - The qtree is set to ntfs only security style.D - The qtree is missing from the /etc/hosts file.Answer: B
No comments:
Post a Comment
Leave Your Valuable Opinion